diff --git a/AnetA8/README.md b/AnetA8/README.md
index be04707..ffab126 100644
--- a/AnetA8/README.md
+++ b/AnetA8/README.md
@@ -13,7 +13,7 @@ All of the upgrades here were mounted using included screws and nuts, and I only
 
 Since I was there, I also upgraded the firmware from Anet's custom one to Marlin 2.x, which has a predefined configuration for the Anet A8. This repo includes by build of Marlin 2.0.9.3, which has the offset definitions for the extruder mount I currently use.
 See [Upgrading Firmware](#firmware) for more info on how I upgaded the firmware.
-[Read how to build Marlin Firmware here](https://github.com/MarlinFirmware/Marlin)
+
 
 <br>
 
@@ -22,22 +22,23 @@ With my current setup retracting the filament is not possible, because it clogs
 
 <br>
 
-**bold** parts are what I currently use
+**bold** parts are what I currently use, but some other parts/setups I tried in the past are also listed
 
 <br>
 
 ## E3Dv6 hotends
- * (currently used)
- * (bought as a replacement for me, gave it to a friend for his anet a8 and it is working perfectly)
+ * https://www.amazon.it/distanziatore-Estrusore-Accessori-estrusore-stampante/dp/B07SJQRKGC/ref=pd_yo_rr_rp_8/262-9324296-5515714?pd_rd_w=xBi6v&pf_rd_p=ef4b4720-9514-470c-af05-06ea9c947edb&pf_rd_r=Y9PW1PF7FXZVBJY0TRNB&pd_rd_r=f3e4cf2a-9ea5-4dfe-95fe-25b2f51c65af&pd_rd_wg=24QNT&pd_rd_i=B07SJQRKGC&psc=1 (currently used)
+ * https://www.amazon.it/gp/product/B07MH5KYW9/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1  (bought as a replacement for me, gave it to a friend for his anet a8 and it is working perfectly)
 
 ## E3Dv6 extruder mounts (+ carriages)
- * ANET A8 | Customizable E3D v6 Carriage / Bowden Mount: https://www.thingiverse.com/thing:2099577
- * 
+ * ANET A8 | Customizable E3D v6 Carriage / Bowden Mount: https://www.thingiverse.com/thing:2099577 (x axis endstop problems)
+ * Anet A8 E3dv6 Bowden Print Carriage Redux: https://www.thingiverse.com/thing:2077676 (used for a lot of time)
  * **Anet A8 E3Dv6 & BlTouch Support / Carrgiage https://www.thingiverse.com/thing:2843500/files** (currently used)
 
 ## Motor bowden mount:
- * Bowden extruder mount: https://www.thingiverse.com/thing:2146021
-
+ * **Anet A8 Bowden extruder mount**: https://www.thingiverse.com/thing:2146021 (currently used)
+ * Anet A8 Customizable bowden extruder mount: https://www.thingiverse.com/thing:2204941
+ 
 ## Fan ducts
  * **Spyra** : https://www.thingiverse.com/thing:2133328/files (currently used)
  * Original, also available here: https://www.thingiverse.com/thing:1438439/files
@@ -45,16 +46,27 @@ With my current setup retracting the filament is not possible, because it clogs
 ## 30mm-to-40mm fan adapter
  * https://www.thingiverse.com/thing:2748800 (currently used)
 
-## X-Axis tensioner
+## X-Axis belt tensioner:
+ * **Anet A8 improved X-belt tensioner:** https://www.thingiverse.com/thing:1683070 (currently used)
 
-## Y-Axis tensioner
+## Y-Axis belt tensioner
+ * **Anet A8 Y belt tensioner:** https://www.thingiverse.com/thing:2149867 (currently used) 
 
 ## Y-Axis braces
+ * **Anet A8 Y-Axis Idler & Motor Brace Upgrades**: https://www.thingiverse.com/thing:2074599
 
-## Hulk frame braces
+## Frame braces
+ * **Hulk frame braces**: https://www.thingiverse.com/thing:2189694 (currently used)
 
 ## Glass pane for print bed
+ * https://www.amazon.it/gp/product/B0777L4HWS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
 
-## Upgrading Firmware {#firmware}
-Probably your Anet A8 won't have a bootloader, but you will need one to flash custom firmware. I used Arduino IDE and a USBAsp to do this
-(WIP)
\ No newline at end of file
+## Upgrading Firmware to Marlin 2.x {#firmware}
+Probably your Anet A8 won't have a bootloader, but you will need one to flash custom firmware. I used Arduino IDE and a USBAsp to do this:
+ 
+ * [Install Arduino IDE](https://www.arduino.cc/en/software) 1.8.x
+ * Clone https://github.com/SkyNet3D/anet-board and copy the contents of the "hardware" folder inside the "hardware" folder of your arduino install (the location of this depends on your OS, search for it)
+ * Launch Arduino IDE, go to Tools/Board and select Anet 1.0 (optiboot)
+ * Go to Tools/Programmer and select your programmer (I used a USBAsp, use what you have, even an Arduino as ISP)
+ * Go to Tools/Burn bootloader. This will flash the bootloader to your board and wipe the flash memory. It can take a while. If it fails with some "signature verification error" most likely you have a faulty connection
+ * Now you can install Marlin 2.x. There's Marlin 2.0.9.3 sources in the Anet A8/Marlin folder, with Configurations for my current hotend, which has an offset compared to the original. [Read how to build Marlin Firmware here](https://github.com/MarlinFirmware/Marlin)
\ No newline at end of file