set $mod Mod4
set $sup Mod4

# Screen setup
# Turn on screen connected to AMD card
exec_always /home/emamaker/.screenlayout/layout.sh
#exec --no-startup-id xrandr --output DisplayPort-0 --primary --mode 1920x1080 --pos 1920x0 --rotate normal --output HDMI-0 --mode 1920x1080 --pos 0x0 --rotate normal --output DVI-0 --off --output DVI-1 --off
set $screen2 HDMI-0
set $screen1 DisplayPort-0

######### Basic I3 Behaviour Config #########
# keyboard layout
exec --no-startup-id setxkbmap -layout it

# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below.
font pango:monospace 12

# This font is widely installed, provides lots of unicode glyphs, right-to-left
# text rendering and scalability on retina/hidpi displays (thanks to pango).
font pango:DejaVu Sans Mono 8

# The combination of xss-lock, nm-applet and pactl is a popular choice, so
# they are included here as an example. Modify as you see fit.

# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the
# screen before suspend. Use loginctl lock-session to lock your screen.
exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork

# Use Mouse+$mod to drag floating windows to their wanted position
floating_modifier $mod

# start a terminal
bindsym $mod+Return exec alacritty
bindsym $mod+Shift+Return prime-run exec alacritty

# kill focused window
bindsym $mod+Shift+q kill

# change focus
bindsym $mod+h focus left
bindsym $mod+j focus down
bindsym $mod+k focus up
bindsym $mod+l focus right

# alternatively, you can use the cursor keys:
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right

# move focused window
bindsym $mod+Shift+h move left
bindsym $mod+Shift+j move down
bindsym $mod+Shift+k move up
bindsym $mod+Shift+l move right

# alternatively, you can use the cursor keys:
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right

# split in horizontal orientation
bindsym $mod+b split h
# split in vertical orientation
bindsym $mod+v split v

# enter fullscreen mode for the focused container
bindsym $mod+f fullscreen toggle
#fullscreen options
popup_during_fullscreen smart

# change container layout (stacked, tabbed, toggle split)
 bindsym $mod+Shift+s layout stacking
bindsym $mod+t layout tabbed
 bindsym $mod+Alt+e layout toggle split

# toggle tiling / floating
bindsym $mod+Shift+space floating toggle

# change focus between tiling / floating windows
#bindsym $mod+space focus mode_toggle

# focus the parent container
# bindsym $mod+a focus parent

# focus the child container
#bindsym $mod+d focus child

# reload the configuration file
bindsym $mod+Shift+c reload

# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym $mod+Shift+r restart
# exit i3 (logs you out of your X session)
bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'"

# resize window (you can also use the mouse for that)
mode "resize" {
        # These bindings trigger as soon as you enter the resize mode

        # Pressing left will shrink the window’s width.
        # Pressing right will grow the window’s width.
        # Pressing up will shrink the window’s height.
        # Pressing down will grow the window’s height.
        bindsym h resize shrink width 10 px or 10 ppt
        bindsym k resize grow height 10 px or 10 ppt
        bindsym j resize shrink height 10 px or 10 ppt
        bindsym l resize grow width 10 px or 10 ppt

        # same bindings, but for the arrow keys
        bindsym Left resize shrink width 10 px or 10 ppt
        bindsym Down resize grow height 10 px or 10 ppt
        bindsym Up resize shrink height 10 px or 10 ppt
        bindsym Right resize grow width 10 px or 10 ppt

        # back to normal: Enter or Escape or $mod+r
        bindsym Return mode "default"
        bindsym Escape mode "default"
        bindsym $mod+r mode "default"
}

bindsym $mod+r mode "resize"

# Disable window titlebars entirely
#for_window [class="^.*"] border pixel 0

#start in opposite orientation from your monitor
default_orientation vertical 

exec_always --no-startup-id i3altlayout

bindsym Mod1+Tab workspace back_and_forth
bindsym Shift+F2 exec i3-input -F 'rename workspace to "%s"' -P 'New name for this workspace: '

############### gaps ###############

# gaps
gaps inner 10
default_border pixel 3
default_floating_border pixel 3 
# Smart borders (draw borders around container only if it is not the only container on this workspace)
# on|no_gaps (on=always activate and no_gaps=only activate if the gap size to the edge of the screen is 0)
#smart_borders on

# Press $mod+Shift+g to enter the gap mode. Choose o or i for modifying outer/inner gaps. Press one of + / - (in-/decrement for current workspace) or 0 (remove gaps for current workspace). If you also press Shift with these keys, the change will be global for all workspaces.
set $mode_gaps Gaps: (o) outer, (i) inner
set $mode_gaps_outer Outer Gaps: +|-|0 (local), Shift + +|-|0 (global)
set $mode_gaps_inner Inner Gaps: +|-|0 (local), Shift + +|-|0 (global)
bindsym $mod+Shift+g mode "$mode_gaps"

mode "$mode_gaps" {
        bindsym o      mode "$mode_gaps_outer"
        bindsym i      mode "$mode_gaps_inner"
        bindsym Return mode "default"
        bindsym Escape mode "default"
}

mode "$mode_gaps_inner" {
        bindsym plus  gaps inner current plus 5
        bindsym minus gaps inner current minus 5
        bindsym 0     gaps inner current set 0

        bindsym Shift+plus  gaps inner all plus 5
        bindsym Shift+minus gaps inner all minus 5
        bindsym Shift+0     gaps inner all set 0

        bindsym Return mode "default"
        bindsym Escape mode "default"
}

mode "$mode_gaps_outer" {
        bindsym plus  gaps outer current plus 5
        bindsym minus gaps outer current minus 5
        bindsym 0     gaps outer current set 0

        bindsym Shift+plus  gaps outer all plus 5
        bindsym Shift+minus gaps outer all minus 5
        bindsym Shift+0     gaps outer all set 0

        bindsym Return mode "default"
        bindsym Escape mode "default"
}
############## end of gaps ###############

client.focused #555555 #555555 #ffffff #2e9ef4     #CC0000

# mouse
mouse_warping output
focus_follows_mouse no

# polybar
# exec_always --no-startup-id $HOME/.config/polybar/launch.sh

# picom
exec_always picom --config $HOME/.config/picom/picom.conf


# Applets / System-tray
exec --no-startup-id nm-applet
#exec --no-startup-id volctl

# wallpaper
set $bg "/home/emamaker/Pictures/Wallpapers/wp11058332-gruvbox-wallpapers.png"
exec_always --no-startup-id feh --bg-fill $bg; 

#rofi
#running with prime so that applications launched from rofi use the dedicated gpu
bindsym $mod+e exec --no-startup-id $HOME/.config/rofi/launchers/type-1/launcher.sh 
bindsym Mod1+e exec --no-startup-id prime-run $HOME/.config/rofi/launchers/type-1/launcher.sh
# rofi power-menu
bindsym $mod+p exec --no-startup-id $HOME/.config/rofi/powermenu/type-1/powermenu.sh
bindsym $mod+x exec --no-startup-id $HOME/.config/rofi/applets/bin/screenshot.sh
bindsym $mod+o exec --no-startup-id $HOME/.config/rofi/applets/bin/volume.sh
bindsym $mod+i exec --no-startup-id $HOME/.config/rofi/applets/bin/brightness.sh
bindsym $mod+u exec --no-startup-id $HOME/.config/rofi/applets/bin/battery.sh

#scratchpad
bindsym $mod+minus move scratchpad

############### workspaces mapping ###############
# Define names for default workspaces for which we configure key bindings later on.
# We use variables to avoid repeating the names in multiple places.
set $ws1 "1"
set $ws2 "2"
set $ws3 "3"
set $ws4 "4"
set $ws5 "5"
set $ws6 "6"
set $ws7 "7"
set $ws8 "8"
set $ws9 "9"
set $ws10 "10"
set $ws11 "11"
set $ws12 "12"
set $ws13 "13"
set $ws14 "14"
set $ws15 "15"
set $ws16 "16"
set $ws17 "17"
set $ws18 "18"
set $ws19 "19"
set $ws20 "20"

# switch to workspace
bindsym $mod+1 workspace number $ws1
bindsym $mod+2 workspace number $ws2
bindsym $mod+3 workspace number $ws3
bindsym $mod+4 workspace number $ws4
bindsym $mod+5 workspace number $ws5
bindsym $mod+6 workspace number $ws6
bindsym $mod+7 workspace number $ws7
bindsym $mod+8 workspace number $ws8
bindsym $mod+9 workspace number $ws9
bindsym $mod+0 workspace number $ws10

bindsym Mod1+1 workspace number $ws11
bindsym Mod1+2 workspace number $ws12
bindsym Mod1+3 workspace number $ws13
bindsym Mod1+4 workspace number $ws14
bindsym Mod1+5 workspace number $ws15
bindsym Mod1+6 workspace number $ws16
bindsym Mod1+7 workspace number $ws17
bindsym Mod1+8 workspace number $ws18
bindsym Mod1+9 workspace number $ws19
bindsym Mod1+0 workspace number $ws20

# move focused container to workspace
bindsym $mod+Shift+1 move container to workspace number $ws1
bindsym $mod+Shift+2 move container to workspace number $ws2
bindsym $mod+Shift+3 move container to workspace number $ws3
bindsym $mod+Shift+4 move container to workspace number $ws4
bindsym $mod+Shift+5 move container to workspace number $ws5
bindsym $mod+Shift+6 move container to workspace number $ws6
bindsym $mod+Shift+7 move container to workspace number $ws7
bindsym $mod+Shift+8 move container to workspace number $ws8
bindsym $mod+Shift+9 move container to workspace number $ws9
bindsym $mod+Shift+0 move container to workspace number $ws10

bindsym Mod1+Shift+1 move container to workspace number $ws11
bindsym Mod1+Shift+2 move container to workspace number $ws12
bindsym Mod1+Shift+3 move container to workspace number $ws13
bindsym Mod1+Shift+4 move container to workspace number $ws14
bindsym Mod1+Shift+5 move container to workspace number $ws15
bindsym Mod1+Shift+6 move container to workspace number $ws16
bindsym Mod1+Shift+7 move container to workspace number $ws17
bindsym Mod1+Shift+8 move container to workspace number $ws18
bindsym Mod1+Shift+9 move container to workspace number $ws19
bindsym Mod1+Shift+0 move container to workspace number $ws20

#map workspace to screen
workspace $ws1 output $screen1
workspace $ws2 output $screen1
workspace $ws3 output $screen1
workspace $ws4 output $screen1
workspace $ws5 output $screen1
workspace $ws6 output $screen1
workspace $ws7 output $screen1
workspace $ws8 output $screen1
workspace $ws9 output $screen1
workspace $ws10 output $screen1

workspace $ws11 output $screen2
workspace $ws12 output $screen2
workspace $ws13 output $screen2
workspace $ws14 output $screen2
workspace $ws15 output $screen2
workspace $ws16 output $screen2
workspace $ws17 output $screen2
workspace $ws18 output $screen2
workspace $ws19 output $screen2
workspace $ws20 output $screen2
############### end of workspace mapping ###############

############### i3 resurrect ###############
set $i3_resurrect /home/emamaker/.local/bin/i3-resurrect

exec --no-startup-id i3_resurrect restore -w $ws10; sleep 1; $i3_resurrect restore -w $ws20

# Save workspace mode.
mode "save" {
  bindsym 1 exec $i3_resurrect save -w $ws1
  bindsym 2 exec $i3_resurrect save -w $ws2
  bindsym 3 exec $i3_resurrect save -w $ws3
  bindsym 4 exec $i3_resurrect save -w $ws4
  bindsym 5 exec $i3_resurrect save -w $ws5
  bindsym 6 exec $i3_resurrect save -w $ws6
  bindsym 7 exec $i3_resurrect save -w $ws7
  bindsym 8 exec $i3_resurrect save -w $ws8
  bindsym 9 exec $i3_resurrect save -w $ws9
  bindsym 0 exec $i3_resurrect save -w $ws10
  bindsym q exec $i3_resurrect save -w $ws11
  bindsym w exec $i3_resurrect save -w $ws12
  bindsym e exec $i3_resurrect save -w $ws13
  bindsym r exec $i3_resurrect save -w $ws14
  bindsym t exec $i3_resurrect save -w $ws15
  bindsym y exec $i3_resurrect save -w $ws16
  bindsym u exec $i3_resurrect save -w $ws17
  bindsym i exec $i3_resurrect save -w $ws18
  bindsym o exec $i3_resurrect save -w $ws19
  bindsym p exec $i3_resurrect save -w $ws20

  # Back to normal: Enter, Escape, or s
  bindsym Return mode "default"
  bindsym Escape mode "default"
  bindsym s mode "default"
  bindsym $mod+s mode "default"
}

bindsym $mod+s mode "save"

# Restore workspace mode.
mode "restore" {
  bindsym 1 exec $i3_resurrect restore -w $ws1
  bindsym 2 exec $i3_resurrect restore -w $ws2
  bindsym 3 exec $i3_resurrect restore -w $ws3
  bindsym 4 exec $i3_resurrect restore -w $ws4
  bindsym 5 exec $i3_resurrect restore -w $ws5
  bindsym 6 exec $i3_resurrect restore -w $ws6
  bindsym 7 exec $i3_resurrect restore -w $ws7
  bindsym 8 exec $i3_resurrect restore -w $ws8
  bindsym 9 exec $i3_resurrect restore -w $ws9
  bindsym 0 exec $i3_resurrect restore -w $ws10
  bindsym q exec $i3_resurrect restore -w $ws11
  bindsym w exec $i3_resurrect restore -w $ws12
  bindsym e exec $i3_resurrect restore -w $ws13
  bindsym r exec $i3_resurrect restore -w $ws14
  bindsym t exec $i3_resurrect restore -w $ws15
  bindsym y exec $i3_resurrect restore -w $ws16
  bindsym u exec $i3_resurrect restore -w $ws17
  bindsym i exec $i3_resurrect restore -w $ws18
  bindsym o exec $i3_resurrect restore -w $ws19
  bindsym p exec $i3_resurrect restore -w $ws20

  # Back to normal: Enter, Escape, or n
  bindsym Return mode "default"
  bindsym Escape mode "default"
  bindsym n mode "default"
  bindsym $mod+n mode "default"
}

bindsym $mod+n mode "restore"
############### end of i3-resurrect ###############


exec /usr/lib/polkit-1/polkitd --no-debug
exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1 &

bindsym XF86AudioRaiseVolume exec amixer -q set Master 2dB+ unmute
bindsym XF86AudioLowerVolume exec amixer -q set Master 2dB- unmute
bindsym XF86AudioMute exec amixer -q set Master toggle && amixer -q set Speaker toggle 
bindsym XF86AudioMicMute exec amixer -q set Capture toggle 
bindsym XF86MonBrightnessUp exec xbacklight -inc 10
bindsym XF86MonBrightnessDown exec xbacklight -dec 10

for_window [class="Viewnior"] floating enable
# assign to workspaces
assign [class="TelegramDesktop"] $ws10
assign [class="Whatsapp-for-linux"] $ws10
assign [class="discord"] $ws10
assign [class="Whatstux"] $ws10
assign [class="UXTerm"] $ws20
for_window [class="Gnome-screenshot"] floating enable

# autostart
exec --no-startup-id telegram-desktop 
exec --no-startup-id xfce4-power-manager 
exec --no-startup-id whatstux 
exec --no-startup-id touchegg 
exec --no-startup-id guake 
exec --no-startup-id xfce4-panel --disable-wm-check
exec --no-startup-id nm-applet

exec_always killall ruby; watch_table &
exec_always killall rot8; rot8 -d eDP1 --touchscreen "Wacom Pen and multitouch sensor Finger" "Wacom Pen and multitouch sensor Pen Pen (0x9b1338a9)" "Wacom Pen and multitouch sensor Pen Eraser (0x9b1338a9)" &