573 lines
18 KiB
C++
Executable File
573 lines
18 KiB
C++
Executable File
/*!
|
|
* @file Adafruit_SPITFT.cpp
|
|
*
|
|
* @mainpage Adafruit SPI TFT Displays
|
|
*
|
|
* @section intro_sec Introduction
|
|
This is our library for generic SPI TFT Displays with
|
|
address windows and 16 bit color (e.g. ILI9341, HX8357D, ST7735...)
|
|
|
|
Check out the links above for our tutorials and wiring diagrams
|
|
These displays use SPI to communicate, 4 or 5 pins are required to
|
|
interface (RST is optional)
|
|
Adafruit invests time and resources providing this open source code,
|
|
please support Adafruit and open-source hardware by purchasing
|
|
products from Adafruit!
|
|
|
|
Written by Limor Fried/Ladyada for Adafruit Industries.
|
|
MIT license, all text above must be included in any redistribution
|
|
* @section dependencies Dependencies
|
|
*
|
|
* This library depends on <a href="https://github.com/adafruit/Adafruit_GFX">
|
|
* Adafruit_GFX</a> being present on your system. Please make sure you have
|
|
* installed the latest version before using this library.
|
|
*
|
|
* @section author Author
|
|
*
|
|
* Written by Limor "ladyada" Fried for Adafruit Industries.
|
|
*
|
|
* @section license License
|
|
*
|
|
* BSD license, all text here must be included in any redistribution.
|
|
*
|
|
*/
|
|
|
|
// NOT A CHANCE of this stuff working on ATtiny, No SPIClass on WICED (yet?)
|
|
#if (!defined(__AVR_ATtiny85__) && !defined(ARDUINO_STM32_FEATHER))
|
|
|
|
#include "Adafruit_SPITFT.h"
|
|
#include "pins_arduino.h"
|
|
#ifndef RASPI
|
|
#include "wiring_private.h"
|
|
#endif
|
|
#include <limits.h>
|
|
|
|
#include "Adafruit_SPITFT_Macros.h"
|
|
|
|
|
|
/**************************************************************************/
|
|
/*!
|
|
@brief Pass 8-bit (each) R,G,B, get back 16-bit packed color
|
|
This function converts 8-8-8 RGB data to 16-bit 5-6-5
|
|
@param red Red 8 bit color
|
|
@param green Green 8 bit color
|
|
@param blue Blue 8 bit color
|
|
@return Unsigned 16-bit down-sampled color in 5-6-5 format
|
|
*/
|
|
/**************************************************************************/
|
|
uint16_t Adafruit_SPITFT::color565(uint8_t red, uint8_t green, uint8_t blue) {
|
|
return ((red & 0xF8) << 8) | ((green & 0xFC) << 3) | ((blue & 0xF8) >> 3);
|
|
}
|
|
|
|
|
|
/**************************************************************************/
|
|
/*!
|
|
@brief Instantiate Adafruit SPI display driver with software SPI
|
|
@param w Display width in pixels
|
|
@param h Display height in pixels
|
|
@param cs Chip select pin #
|
|
@param dc Data/Command pin #
|
|
@param mosi SPI MOSI pin #
|
|
@param sclk SPI Clock pin #
|
|
@param rst Reset pin # (optional, pass -1 if unused)
|
|
@param miso SPI MISO pin # (optional, pass -1 if unused)
|
|
*/
|
|
/**************************************************************************/
|
|
Adafruit_SPITFT::Adafruit_SPITFT(uint16_t w, uint16_t h,
|
|
int8_t cs, int8_t dc, int8_t mosi,
|
|
int8_t sclk, int8_t rst, int8_t miso)
|
|
: Adafruit_GFX(w, h) {
|
|
_cs = cs;
|
|
_dc = dc;
|
|
_rst = rst;
|
|
_sclk = sclk;
|
|
_mosi = mosi;
|
|
_miso = miso;
|
|
_freq = 0;
|
|
#ifdef USE_FAST_PINIO
|
|
dcport = (RwReg *)portOutputRegister(digitalPinToPort(dc));
|
|
dcpinmask = digitalPinToBitMask(dc);
|
|
clkport = (RwReg *)portOutputRegister(digitalPinToPort(sclk));
|
|
clkpinmask = digitalPinToBitMask(sclk);
|
|
mosiport = (RwReg *)portOutputRegister(digitalPinToPort(mosi));
|
|
mosipinmask = digitalPinToBitMask(mosi);
|
|
if(miso >= 0){
|
|
misoport = (RwReg *)portInputRegister(digitalPinToPort(miso));
|
|
misopinmask = digitalPinToBitMask(miso);
|
|
} else {
|
|
misoport = 0;
|
|
misopinmask = 0;
|
|
}
|
|
if(cs >= 0) {
|
|
csport = (RwReg *)portOutputRegister(digitalPinToPort(cs));
|
|
cspinmask = digitalPinToBitMask(cs);
|
|
} else {
|
|
// No chip-select line defined; might be permanently tied to GND.
|
|
// Assign a valid GPIO register (though not used for CS), and an
|
|
// empty pin bitmask...the nonsense bit-twiddling might be faster
|
|
// than checking _cs and possibly branching.
|
|
csport = dcport;
|
|
cspinmask = 0;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/**************************************************************************/
|
|
/*!
|
|
@brief Instantiate Adafruit SPI display driver with hardware SPI
|
|
@param w Display width in pixels
|
|
@param h Display height in pixels
|
|
@param cs Chip select pin #
|
|
@param dc Data/Command pin #
|
|
@param rst Reset pin # (optional, pass -1 if unused)
|
|
*/
|
|
/**************************************************************************/
|
|
Adafruit_SPITFT::Adafruit_SPITFT(uint16_t w, uint16_t h,
|
|
int8_t cs, int8_t dc, int8_t rst)
|
|
: Adafruit_SPITFT(w, h, &SPI, cs, dc, rst)
|
|
{
|
|
// We just call the hardware SPI instantiator with the default SPI device (&SPI)
|
|
}
|
|
|
|
/**************************************************************************/
|
|
/*!
|
|
@brief Instantiate Adafruit SPI display driver with hardware SPI
|
|
@param w Display width in pixels
|
|
@param h Display height in pixels
|
|
@param spiClass A pointer to an SPI hardware interface, e.g. &SPI1
|
|
@param cs Chip select pin #
|
|
@param dc Data/Command pin #
|
|
@param rst Reset pin # (optional, pass -1 if unused)
|
|
*/
|
|
/**************************************************************************/
|
|
Adafruit_SPITFT::Adafruit_SPITFT(uint16_t w, uint16_t h, SPIClass *spiClass,
|
|
int8_t cs, int8_t dc, int8_t rst)
|
|
: Adafruit_GFX(w, h) {
|
|
_cs = cs;
|
|
_dc = dc;
|
|
_rst = rst;
|
|
_spi = spiClass;
|
|
_sclk = -1;
|
|
_mosi = -1;
|
|
_miso = -1;
|
|
_freq = 0;
|
|
#ifdef USE_FAST_PINIO
|
|
clkport = 0;
|
|
clkpinmask = 0;
|
|
mosiport = 0;
|
|
mosipinmask = 0;
|
|
misoport = 0;
|
|
misopinmask = 0;
|
|
dcport = (RwReg *)portOutputRegister(digitalPinToPort(dc));
|
|
dcpinmask = digitalPinToBitMask(dc);
|
|
if(cs >= 0) {
|
|
csport = (RwReg *)portOutputRegister(digitalPinToPort(cs));
|
|
cspinmask = digitalPinToBitMask(cs);
|
|
} else {
|
|
// See notes in prior constructor.
|
|
csport = dcport;
|
|
cspinmask = 0;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/**************************************************************************/
|
|
/*!
|
|
@brief Initialiaze the SPI interface (hardware or software)
|
|
@param freq The desired maximum SPI hardware clock frequency
|
|
*/
|
|
/**************************************************************************/
|
|
void Adafruit_SPITFT::initSPI(uint32_t freq) {
|
|
_freq = freq;
|
|
|
|
// Control Pins
|
|
if(_cs >= 0) {
|
|
pinMode(_cs, OUTPUT);
|
|
digitalWrite(_cs, HIGH); // Deselect
|
|
}
|
|
pinMode(_dc, OUTPUT);
|
|
digitalWrite(_dc, LOW);
|
|
|
|
// Software SPI
|
|
if(_sclk >= 0){
|
|
pinMode(_mosi, OUTPUT);
|
|
digitalWrite(_mosi, LOW);
|
|
pinMode(_sclk, OUTPUT);
|
|
digitalWrite(_sclk, HIGH);
|
|
if(_miso >= 0){
|
|
pinMode(_miso, INPUT);
|
|
}
|
|
}
|
|
|
|
// Hardware SPI
|
|
SPI_BEGIN();
|
|
|
|
// toggle RST low to reset
|
|
if (_rst >= 0) {
|
|
pinMode(_rst, OUTPUT);
|
|
digitalWrite(_rst, HIGH);
|
|
delay(100);
|
|
digitalWrite(_rst, LOW);
|
|
delay(100);
|
|
digitalWrite(_rst, HIGH);
|
|
delay(200);
|
|
}
|
|
}
|
|
|
|
/**************************************************************************/
|
|
/*!
|
|
@brief Read one byte from SPI interface (hardware or software
|
|
@returns One byte, MSB order
|
|
*/
|
|
/**************************************************************************/
|
|
uint8_t Adafruit_SPITFT::spiRead() {
|
|
if(_sclk < 0){
|
|
return HSPI_READ();
|
|
}
|
|
if(_miso < 0){
|
|
return 0;
|
|
}
|
|
uint8_t r = 0;
|
|
for (uint8_t i=0; i<8; i++) {
|
|
SSPI_SCK_LOW();
|
|
SSPI_SCK_HIGH();
|
|
r <<= 1;
|
|
if (SSPI_MISO_READ()){
|
|
r |= 0x1;
|
|
}
|
|
}
|
|
return r;
|
|
}
|
|
|
|
/**************************************************************************/
|
|
/*!
|
|
@brief Write one byte to SPI interface (hardware or software
|
|
@param b One byte to send, MSB order
|
|
*/
|
|
/**************************************************************************/
|
|
void Adafruit_SPITFT::spiWrite(uint8_t b) {
|
|
if(_sclk < 0){
|
|
HSPI_WRITE(b);
|
|
return;
|
|
}
|
|
for(uint8_t bit = 0x80; bit; bit >>= 1){
|
|
if((b) & bit){
|
|
SSPI_MOSI_HIGH();
|
|
} else {
|
|
SSPI_MOSI_LOW();
|
|
}
|
|
SSPI_SCK_LOW();
|
|
SSPI_SCK_HIGH();
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* Transaction API
|
|
* */
|
|
|
|
/**************************************************************************/
|
|
/*!
|
|
@brief Begin an SPI transaction & set CS low.
|
|
*/
|
|
/**************************************************************************/
|
|
void inline Adafruit_SPITFT::startWrite(void){
|
|
SPI_BEGIN_TRANSACTION();
|
|
SPI_CS_LOW();
|
|
}
|
|
|
|
/**************************************************************************/
|
|
/*!
|
|
@brief Begin an SPI transaction & set CS high.
|
|
*/
|
|
/**************************************************************************/
|
|
void inline Adafruit_SPITFT::endWrite(void){
|
|
SPI_CS_HIGH();
|
|
SPI_END_TRANSACTION();
|
|
}
|
|
|
|
/**************************************************************************/
|
|
/*!
|
|
@brief Write a command byte (must have a transaction in progress)
|
|
@param cmd The 8-bit command to send
|
|
*/
|
|
/**************************************************************************/
|
|
void Adafruit_SPITFT::writeCommand(uint8_t cmd){
|
|
SPI_DC_LOW();
|
|
spiWrite(cmd);
|
|
SPI_DC_HIGH();
|
|
}
|
|
|
|
/**************************************************************************/
|
|
/*!
|
|
@brief Push a 2-byte color to the framebuffer RAM, will start transaction
|
|
@param color 16-bit 5-6-5 Color to draw
|
|
*/
|
|
/**************************************************************************/
|
|
void Adafruit_SPITFT::pushColor(uint16_t color) {
|
|
startWrite();
|
|
SPI_WRITE16(color);
|
|
endWrite();
|
|
}
|
|
|
|
|
|
|
|
/**************************************************************************/
|
|
/*!
|
|
@brief Blit multiple 2-byte colors (must have a transaction in progress)
|
|
@param colors Array of 16-bit 5-6-5 Colors to draw
|
|
@param len How many pixels to draw - 2 bytes per pixel!
|
|
*/
|
|
/**************************************************************************/
|
|
void Adafruit_SPITFT::writePixels(uint16_t * colors, uint32_t len){
|
|
SPI_WRITE_PIXELS((uint8_t*)colors , len * 2);
|
|
}
|
|
|
|
/**************************************************************************/
|
|
/*!
|
|
@brief Blit a 2-byte color many times (must have a transaction in progress)
|
|
@param color The 16-bit 5-6-5 Color to draw
|
|
@param len How many pixels to draw
|
|
*/
|
|
/**************************************************************************/
|
|
void Adafruit_SPITFT::writeColor(uint16_t color, uint32_t len){
|
|
#ifdef SPI_HAS_WRITE_PIXELS
|
|
if(_sclk >= 0){
|
|
for (uint32_t t=0; t<len; t++){
|
|
writePixel(color);
|
|
}
|
|
return;
|
|
}
|
|
static uint16_t temp[SPI_MAX_PIXELS_AT_ONCE];
|
|
size_t blen = (len > SPI_MAX_PIXELS_AT_ONCE)?SPI_MAX_PIXELS_AT_ONCE:len;
|
|
uint16_t tlen = 0;
|
|
|
|
for (uint32_t t=0; t<blen; t++){
|
|
temp[t] = color;
|
|
}
|
|
|
|
while(len){
|
|
tlen = (len>blen)?blen:len;
|
|
writePixels(temp, tlen);
|
|
len -= tlen;
|
|
}
|
|
#else
|
|
uint8_t hi = color >> 8, lo = color;
|
|
if(_sclk < 0){ //AVR Optimization
|
|
for (uint32_t t=len; t; t--){
|
|
HSPI_WRITE(hi);
|
|
HSPI_WRITE(lo);
|
|
}
|
|
return;
|
|
}
|
|
for (uint32_t t=len; t; t--){
|
|
spiWrite(hi);
|
|
spiWrite(lo);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/**************************************************************************/
|
|
/*!
|
|
@brief Write a pixel (must have a transaction in progress)
|
|
@param x x coordinate
|
|
@param y y coordinate
|
|
@param color 16-bit 5-6-5 Color to draw with
|
|
*/
|
|
/**************************************************************************/
|
|
void Adafruit_SPITFT::writePixel(int16_t x, int16_t y, uint16_t color) {
|
|
if((x < 0) ||(x >= _width) || (y < 0) || (y >= _height)) return;
|
|
setAddrWindow(x,y,1,1);
|
|
writePixel(color);
|
|
}
|
|
|
|
/**************************************************************************/
|
|
/*!
|
|
@brief Write a filled rectangle (must have a transaction in progress)
|
|
@param x Top left corner x coordinate
|
|
@param y Top left corner y coordinate
|
|
@param w Width in pixels
|
|
@param h Height in pixels
|
|
@param color 16-bit 5-6-5 Color to fill with
|
|
*/
|
|
/**************************************************************************/
|
|
void Adafruit_SPITFT::writeFillRect(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t color){
|
|
if((x >= _width) || (y >= _height)) return;
|
|
int16_t x2 = x + w - 1, y2 = y + h - 1;
|
|
if((x2 < 0) || (y2 < 0)) return;
|
|
|
|
// Clip left/top
|
|
if(x < 0) {
|
|
x = 0;
|
|
w = x2 + 1;
|
|
}
|
|
if(y < 0) {
|
|
y = 0;
|
|
h = y2 + 1;
|
|
}
|
|
|
|
// Clip right/bottom
|
|
if(x2 >= _width) w = _width - x;
|
|
if(y2 >= _height) h = _height - y;
|
|
|
|
int32_t len = (int32_t)w * h;
|
|
setAddrWindow(x, y, w, h);
|
|
writeColor(color, len);
|
|
}
|
|
|
|
/**************************************************************************/
|
|
/*!
|
|
@brief Write a perfectly vertical line (must have a transaction in progress)
|
|
@param x Top-most x coordinate
|
|
@param y Top-most y coordinate
|
|
@param h Height in pixels
|
|
@param color 16-bit 5-6-5 Color to fill with
|
|
*/
|
|
/**************************************************************************/
|
|
void inline Adafruit_SPITFT::writeFastVLine(int16_t x, int16_t y, int16_t h, uint16_t color){
|
|
writeFillRect(x, y, 1, h, color);
|
|
}
|
|
|
|
/**************************************************************************/
|
|
/*!
|
|
@brief Write a perfectly horizontal line (must have a transaction in progress)
|
|
@param x Left-most x coordinate
|
|
@param y Left-most y coordinate
|
|
@param w Width in pixels
|
|
@param color 16-bit 5-6-5 Color to fill with
|
|
*/
|
|
/**************************************************************************/
|
|
void inline Adafruit_SPITFT::writeFastHLine(int16_t x, int16_t y, int16_t w, uint16_t color){
|
|
writeFillRect(x, y, w, 1, color);
|
|
}
|
|
|
|
/**************************************************************************/
|
|
/*!
|
|
@brief Draw a pixel - sets up transaction
|
|
@param x x coordinate
|
|
@param y y coordinate
|
|
@param color 16-bit 5-6-5 Color to draw with
|
|
*/
|
|
/**************************************************************************/
|
|
void Adafruit_SPITFT::drawPixel(int16_t x, int16_t y, uint16_t color){
|
|
startWrite();
|
|
writePixel(x, y, color);
|
|
endWrite();
|
|
}
|
|
|
|
/**************************************************************************/
|
|
/*!
|
|
@brief Write a perfectly vertical line - sets up transaction
|
|
@param x Top-most x coordinate
|
|
@param y Top-most y coordinate
|
|
@param h Height in pixels
|
|
@param color 16-bit 5-6-5 Color to fill with
|
|
*/
|
|
/**************************************************************************/
|
|
void Adafruit_SPITFT::drawFastVLine(int16_t x, int16_t y,
|
|
int16_t h, uint16_t color) {
|
|
startWrite();
|
|
writeFastVLine(x, y, h, color);
|
|
endWrite();
|
|
}
|
|
|
|
/**************************************************************************/
|
|
/*!
|
|
@brief Write a perfectly horizontal line - sets up transaction
|
|
@param x Left-most x coordinate
|
|
@param y Left-most y coordinate
|
|
@param w Width in pixels
|
|
@param color 16-bit 5-6-5 Color to fill with
|
|
*/
|
|
/**************************************************************************/
|
|
void Adafruit_SPITFT::drawFastHLine(int16_t x, int16_t y,
|
|
int16_t w, uint16_t color) {
|
|
startWrite();
|
|
writeFastHLine(x, y, w, color);
|
|
endWrite();
|
|
}
|
|
|
|
/**************************************************************************/
|
|
/*!
|
|
@brief Fill a rectangle completely with one color.
|
|
@param x Top left corner x coordinate
|
|
@param y Top left corner y coordinate
|
|
@param w Width in pixels
|
|
@param h Height in pixels
|
|
@param color 16-bit 5-6-5 Color to fill with
|
|
*/
|
|
/**************************************************************************/
|
|
void Adafruit_SPITFT::fillRect(int16_t x, int16_t y, int16_t w, int16_t h,
|
|
uint16_t color) {
|
|
startWrite();
|
|
writeFillRect(x,y,w,h,color);
|
|
endWrite();
|
|
}
|
|
|
|
|
|
/**************************************************************************/
|
|
/*!
|
|
@brief Invert the display using built-in hardware command
|
|
@param i True if you want to invert, false to make 'normal'
|
|
*/
|
|
/**************************************************************************/
|
|
void Adafruit_SPITFT::invertDisplay(boolean i) {
|
|
startWrite();
|
|
writeCommand(i ? invertOnCommand : invertOffCommand);
|
|
endWrite();
|
|
}
|
|
|
|
|
|
/**************************************************************************/
|
|
/*!
|
|
@brief Draw a 16-bit image (RGB 5/6/5) at the specified (x,y) position.
|
|
For 16-bit display devices; no color reduction performed.
|
|
Adapted from https://github.com/PaulStoffregen/ILI9341_t3
|
|
by Marc MERLIN. See examples/pictureEmbed to use this.
|
|
5/6/2017: function name and arguments have changed for compatibility
|
|
with current GFX library and to avoid naming problems in prior
|
|
implementation. Formerly drawBitmap() with arguments in different order.
|
|
|
|
@param x Top left corner x coordinate
|
|
@param y Top left corner y coordinate
|
|
@param pcolors 16-bit array with 16-bit color bitmap
|
|
@param w Width of bitmap in pixels
|
|
@param h Height of bitmap in pixels
|
|
*/
|
|
/**************************************************************************/
|
|
void Adafruit_SPITFT::drawRGBBitmap(int16_t x, int16_t y,
|
|
uint16_t *pcolors, int16_t w, int16_t h) {
|
|
|
|
int16_t x2, y2; // Lower-right coord
|
|
if(( x >= _width ) || // Off-edge right
|
|
( y >= _height) || // " top
|
|
((x2 = (x+w-1)) < 0 ) || // " left
|
|
((y2 = (y+h-1)) < 0) ) return; // " bottom
|
|
|
|
int16_t bx1=0, by1=0, // Clipped top-left within bitmap
|
|
saveW=w; // Save original bitmap width value
|
|
if(x < 0) { // Clip left
|
|
w += x;
|
|
bx1 = -x;
|
|
x = 0;
|
|
}
|
|
if(y < 0) { // Clip top
|
|
h += y;
|
|
by1 = -y;
|
|
y = 0;
|
|
}
|
|
if(x2 >= _width ) w = _width - x; // Clip right
|
|
if(y2 >= _height) h = _height - y; // Clip bottom
|
|
|
|
pcolors += by1 * saveW + bx1; // Offset bitmap ptr to clipped top-left
|
|
startWrite();
|
|
setAddrWindow(x, y, w, h); // Clipped area
|
|
while(h--) { // For each (clipped) scanline...
|
|
writePixels(pcolors, w); // Push one (clipped) row
|
|
pcolors += saveW; // Advance pointer by one full (unclipped) line
|
|
}
|
|
endWrite();
|
|
}
|
|
|
|
#endif // !__AVR_ATtiny85__ && !ARDUINO_STM32_FEATHER
|